307 lines
13 KiB
Nix
307 lines
13 KiB
Nix
# astrnet.nix — AstrNet peer "michaotic". Generated by astrnet-join.sh.
|
|
#
|
|
# Identity 10.0.0.9 / 2a05:f480:2400:1cf7::9, ASN 4200000009, two WireGuard
|
|
# legs that THIS host dials:
|
|
# wg-mic-bd8 -> bd8816 (Moscow) PRIMARY, pair 39
|
|
# wg-mic-der -> alderamin (Helsinki) backup, pair 38
|
|
#
|
|
# Egress works like an AstrNet client: both legs announce a default route,
|
|
# and this host sends all its traffic into the mesh. The far end splits it:
|
|
# RU destinations leave via the RU exit, everything else via the
|
|
# international exits. Exceptions stay on the WAN: WireGuard's own packets,
|
|
# replies from the WAN address (inbound services keep working), and the cloud
|
|
# metadata service. If both BGP sessions drop, the BGP default is withdrawn
|
|
# and the WAN default takes over on its own.
|
|
#
|
|
# The WAN values below were detected at install time. Everything else is
|
|
# assigned by the AstrNet admin; do not renumber it.
|
|
{ config, lib, pkgs, ... }:
|
|
let
|
|
keyFile = "/var/lib/astrnet/wg.key";
|
|
id4 = "10.0.0.9";
|
|
id6 = "2a05:f480:2400:1cf7::9";
|
|
|
|
# ── Detected WAN ──
|
|
wanIf = "enp7s0";
|
|
wanGw4 = "10.130.0.1";
|
|
wanIp4 = "10.130.0.36";
|
|
wanGw6 = ""; # "" when there is no IPv6 WAN
|
|
wanIp6 = "";
|
|
|
|
# Table holding the WAN default for the exceptions above, and the mark on
|
|
# WireGuard's outer UDP that selects it (without it the tunnels would try
|
|
# to reach their own endpoints through the mesh default).
|
|
wanTable = "100";
|
|
wgMark = "0x4d49";
|
|
wanRules =
|
|
[ { fam = "-4"; sel = "fwmark ${wgMark}"; }
|
|
{ fam = "-4"; sel = "from ${wanIp4}"; }
|
|
]
|
|
++ lib.optional (wanGw6 != "") { fam = "-6"; sel = "fwmark ${wgMark}"; }
|
|
++ lib.optional (wanGw6 != "" && wanIp6 != "") { fam = "-6"; sel = "from ${wanIp6}"; };
|
|
|
|
mkLeg = { listenPort, ips, publicKey, endpoint }: {
|
|
inherit ips listenPort;
|
|
privateKeyFile = keyFile;
|
|
mtu = 1380;
|
|
fwMark = wgMark;
|
|
# Routing is BGP's job. allowedIPs 0/0 only PERMITS any source through
|
|
# the tunnel; with routes off it installs nothing.
|
|
allowedIPsAsRoutes = false;
|
|
peers = [{
|
|
inherit publicKey endpoint;
|
|
allowedIPs = [ "0.0.0.0/0" "::/0" ];
|
|
persistentKeepalive = 25;
|
|
}];
|
|
};
|
|
in {
|
|
# DHCP keeps the WAN address/DNS but not a competing kernel default route.
|
|
# FRR otherwise prefers the existing kernel route over the BGP default;
|
|
# WAN failback is provided by policy table 100 below.
|
|
networking.dhcpcd.extraConfig = "nogateway";
|
|
|
|
networking.wireguard.interfaces = {
|
|
# The fe80:: link-locals are required: without one FRR's IPv6 BGP
|
|
# next-hop selection fails and the v6 session never leaves Connect.
|
|
wg-mic-bd8 = mkLeg {
|
|
listenPort = 52039;
|
|
ips = [ "10.99.0.158/30" "fd53:4023:2326:99::9e/126" "fe80::2/64" ];
|
|
publicKey = "QIvX+avvJqaHxuksGWb6Hx8fv7R6VI5wpaGqLme6Fgw=";
|
|
endpoint = "195.133.60.217:52039";
|
|
};
|
|
wg-mic-der = mkLeg {
|
|
listenPort = 52038;
|
|
ips = [ "10.99.0.154/30" "fd53:4023:2326:99::9a/126" "fe80::2/64" ];
|
|
publicKey = "a4FyXuoI16TxZxv407lSzJV2YFJdq6FgRAtGu+oMzEY=";
|
|
endpoint = "31.77.105.157:52038";
|
|
};
|
|
};
|
|
|
|
# Explicit owner decision: allow all AstrNet members to access Heather's
|
|
# host services over either WG leg. This does NOT open additional WAN ports,
|
|
# enable forwarding from AstrNet. Egress routing is configured below.
|
|
# WireGuard peers use allowedIPs 0/0 as an ACL, so do not rely on a packet's
|
|
# source address to identify a particular AstrNet client here.
|
|
systemd.services.astrnet-guard = {
|
|
description = "Allow AstrNet host ingress; block AstrNet transit";
|
|
wantedBy = [ "multi-user.target" ];
|
|
requiredBy = [ "wireguard-wg-mic-der.service" "wireguard-wg-mic-bd8.service" ];
|
|
before = [ "wireguard-wg-mic-der.service" "wireguard-wg-mic-bd8.service" ];
|
|
path = [ pkgs.nftables ];
|
|
serviceConfig = { Type = "oneshot"; RemainAfterExit = true; };
|
|
script = ''
|
|
nft list table inet astrnet_guard >/dev/null 2>&1 && nft delete table inet astrnet_guard
|
|
nft -f - <<'RULES'
|
|
table inet astrnet_guard {
|
|
chain input {
|
|
type filter hook input priority -150; policy accept;
|
|
# Full inbound access from AstrNet to Heather, IPv4 and IPv6.
|
|
iifname { "wg-mic-der", "wg-mic-bd8" } accept
|
|
# bgpd listens on 0.0.0.0 and ::; never expose BGP on public WAN.
|
|
iifname "enp7s0" tcp dport 179 drop
|
|
}
|
|
chain forward {
|
|
type filter hook forward priority -150; policy accept;
|
|
iifname { "wg-mic-der", "wg-mic-bd8" } drop
|
|
}
|
|
}
|
|
RULES
|
|
'';
|
|
preStop = "nft delete table inet astrnet_guard || true";
|
|
};
|
|
|
|
# Mesh identity on a dummy interface. It must exist before FRR installs
|
|
# routes, because those routes are pinned to it as their source address.
|
|
systemd.services.astrnet-mesh0 = {
|
|
description = "AstrNet mesh identity (mesh0)";
|
|
wantedBy = [ "multi-user.target" ];
|
|
before = [ "frr.service" ];
|
|
requiredBy = [ "frr.service" ];
|
|
path = [ pkgs.iproute2 ];
|
|
serviceConfig = { Type = "oneshot"; RemainAfterExit = true; };
|
|
script = ''
|
|
ip link show mesh0 >/dev/null 2>&1 || ip link add mesh0 type dummy
|
|
ip link set mesh0 up
|
|
ip addr replace ${id4}/32 dev mesh0
|
|
ip -6 addr replace ${id6}/128 dev mesh0
|
|
'';
|
|
preStop = "ip link del mesh0 || true";
|
|
};
|
|
|
|
# Traffic that must keep using the WAN even while the mesh default is up.
|
|
systemd.services.astrnet-wan-policy = {
|
|
description = "AstrNet: keep tunnel, inbound replies and metadata on the WAN";
|
|
wantedBy = [ "multi-user.target" ];
|
|
after = [ "network-online.target" ];
|
|
wants = [ "network-online.target" ];
|
|
before = [ "frr.service" ];
|
|
requiredBy = [ "frr.service" ];
|
|
path = [ pkgs.iproute2 ];
|
|
serviceConfig = { Type = "oneshot"; RemainAfterExit = true; };
|
|
unitConfig.OnFailure = "astrnet-wan-recovery.service";
|
|
script = ''
|
|
ip route replace default via ${wanGw4} dev ${wanIf} table ${wanTable}
|
|
'' + lib.optionalString (wanGw6 != "") ''
|
|
ip -6 route replace default via ${wanGw6} dev ${wanIf} table ${wanTable}
|
|
'' + ''
|
|
# The cloud metadata endpoint must bypass Docker's 169.254/16 link-local
|
|
# routes; a rule at priority 1000 would never be reached.
|
|
ip -4 rule del to 169.254.169.254 lookup ${wanTable} priority 998 2>/dev/null || true
|
|
ip -4 rule add to 169.254.169.254 lookup ${wanTable} priority 998
|
|
# Specific routes in main (the local subnet, mesh space) always win, so
|
|
# the WAN table below only ever decides where a DEFAULT would go.
|
|
for fam in -4 -6; do
|
|
ip $fam rule del lookup main suppress_prefixlength 0 priority 999 2>/dev/null || true
|
|
ip $fam rule add lookup main suppress_prefixlength 0 priority 999
|
|
done
|
|
'' + lib.concatMapStrings (r: ''
|
|
ip ${r.fam} rule del ${r.sel} lookup ${wanTable} priority 1000 2>/dev/null || true
|
|
ip ${r.fam} rule add ${r.sel} lookup ${wanTable} priority 1000
|
|
'') wanRules + ''
|
|
# Main BGP default wins; WAN table 100 is used if BGP withdraws it.
|
|
ip -4 rule del lookup main priority 2000 2>/dev/null || true
|
|
ip -4 rule add lookup main priority 2000
|
|
ip -4 rule del lookup ${wanTable} priority 2001 2>/dev/null || true
|
|
ip -4 rule add lookup ${wanTable} priority 2001
|
|
# A kernel default in main outranks BGP in FRR itself, regardless of
|
|
# Linux route metric. Remove it only AFTER the fallback rule is live.
|
|
ip -4 route del default via ${wanGw4} dev ${wanIf} 2>/dev/null || true
|
|
'';
|
|
preStop = ''
|
|
# On rollback restore the plain WAN path first.
|
|
ip -4 route replace default via ${wanGw4} dev ${wanIf} metric 1002 || true
|
|
ip -4 rule del lookup main priority 2000 || true
|
|
ip -4 rule del lookup ${wanTable} priority 2001 || true
|
|
ip -4 rule del to 169.254.169.254 lookup ${wanTable} priority 998 || true
|
|
ip -4 rule del lookup main suppress_prefixlength 0 priority 999 || true
|
|
ip -6 rule del lookup main suppress_prefixlength 0 priority 999 || true
|
|
'' + lib.concatMapStrings (r: ''
|
|
ip ${r.fam} rule del ${r.sel} lookup ${wanTable} priority 1000 || true
|
|
'') wanRules;
|
|
};
|
|
|
|
# If policy setup fails, leave a normal WAN default rather than a stranded host.
|
|
systemd.services.astrnet-wan-recovery = {
|
|
description = "Restore YC WAN route if AstrNet policy fails";
|
|
path = [ pkgs.iproute2 ];
|
|
serviceConfig.Type = "oneshot";
|
|
script = "ip -4 route replace default via ${wanGw4} dev ${wanIf} metric 1002";
|
|
};
|
|
|
|
# BGP only inside the tunnels, never on the public interface.
|
|
networking.firewall.interfaces."wg-mic-bd8".allowedTCPPorts = [ 179 ];
|
|
networking.firewall.interfaces."wg-mic-der".allowedTCPPorts = [ 179 ];
|
|
# Traffic can return on the leg that is not the current best route.
|
|
# Strict reverse-path filtering drops that; loose keeps the spoof check.
|
|
networking.firewall.checkReversePath = lib.mkDefault "loose";
|
|
|
|
networking.networkmanager.unmanaged =
|
|
lib.mkIf config.networking.networkmanager.enable
|
|
[ "interface-name:wg-mic-*" "interface-name:mesh0" ];
|
|
|
|
services.frr = {
|
|
bgpd.enable = true;
|
|
config = ''
|
|
ip prefix-list OWN-V4 seq 5 permit ${id4}/32
|
|
ipv6 prefix-list OWN-V6 seq 5 permit ${id6}/128
|
|
!
|
|
! Accept the default the mesh hands us, plus mesh space. Nothing else:
|
|
! public prefixes are the far end's business (it does the RU/intl
|
|
! split), and the mesh carries anycast /32s for public services that
|
|
! must not be installed here.
|
|
ip prefix-list MESH-V4 seq 1 permit 0.0.0.0/0
|
|
! Preserve Heather's narrower accepted mesh space (not YC 10.130/24).
|
|
ip prefix-list MESH-V4 seq 5 permit 10.0.0.0/24 ge 24 le 32
|
|
ip prefix-list MESH-V4 seq 10 permit 10.0.1.0/24 ge 24 le 32
|
|
ip prefix-list MESH-V4 seq 15 permit 10.0.2.0/24 ge 24 le 32
|
|
ip prefix-list MESH-V4 seq 20 permit 10.99.0.0/22 ge 22 le 32
|
|
ipv6 prefix-list MESH-V6 seq 1 permit ::/0
|
|
ipv6 prefix-list MESH-V6 seq 5 permit 2a05:f480:2400:1cf7::/64 le 128
|
|
ipv6 prefix-list MESH-V6 seq 10 permit fd53:4023:2326::/48 le 128
|
|
!
|
|
! bd8816 is primary (same city): higher local-preference inbound...
|
|
route-map IN-BD8-V4 permit 10
|
|
match ip address prefix-list MESH-V4
|
|
set local-preference 200
|
|
exit
|
|
route-map IN-BD8-V6 permit 10
|
|
match ipv6 address prefix-list MESH-V6
|
|
set local-preference 200
|
|
exit
|
|
route-map IN-DER-V4 permit 10
|
|
match ip address prefix-list MESH-V4
|
|
exit
|
|
route-map IN-DER-V6 permit 10
|
|
match ipv6 address prefix-list MESH-V6
|
|
exit
|
|
!
|
|
! ...and a longer path via alderamin outbound, so replies from the rest
|
|
! of the mesh come back through bd8816 too.
|
|
route-map OUT-BD8-V4 permit 10
|
|
match ip address prefix-list OWN-V4
|
|
exit
|
|
route-map OUT-BD8-V6 permit 10
|
|
match ipv6 address prefix-list OWN-V6
|
|
exit
|
|
route-map OUT-DER-V4 permit 10
|
|
match ip address prefix-list OWN-V4
|
|
set as-path prepend 4200000009 4200000009
|
|
exit
|
|
route-map OUT-DER-V6 permit 10
|
|
match ipv6 address prefix-list OWN-V6
|
|
set as-path prepend 4200000009 4200000009
|
|
exit
|
|
!
|
|
! Source everything routed via BGP (the mesh default included) from the
|
|
! identity; the exits NAT that address.
|
|
route-map SET-MESH-SRC permit 10
|
|
set src ${id4}
|
|
exit
|
|
route-map SET-MESH-SRC-V6 permit 10
|
|
set src ${id6}
|
|
exit
|
|
ip protocol bgp route-map SET-MESH-SRC
|
|
ipv6 protocol bgp route-map SET-MESH-SRC-V6
|
|
!
|
|
router bgp 4200000009
|
|
bgp router-id ${id4}
|
|
no bgp ebgp-requires-policy
|
|
no bgp default ipv4-unicast
|
|
neighbor 10.99.0.157 remote-as 4200000005
|
|
neighbor 10.99.0.157 description bd8816-v4-wg-mic-bd8
|
|
neighbor 10.99.0.157 update-source 10.99.0.158
|
|
neighbor 10.99.0.153 remote-as 4200000012
|
|
neighbor 10.99.0.153 description alderamin-v4-wg-mic-der
|
|
neighbor 10.99.0.153 update-source 10.99.0.154
|
|
neighbor fd53:4023:2326:99::9d remote-as 4200000005
|
|
neighbor fd53:4023:2326:99::9d description bd8816-v6-wg-mic-bd8
|
|
neighbor fd53:4023:2326:99::9d interface wg-mic-bd8
|
|
neighbor fd53:4023:2326:99::9d update-source fd53:4023:2326:99::9e
|
|
neighbor fd53:4023:2326:99::99 remote-as 4200000012
|
|
neighbor fd53:4023:2326:99::99 description alderamin-v6-wg-mic-der
|
|
neighbor fd53:4023:2326:99::99 interface wg-mic-der
|
|
neighbor fd53:4023:2326:99::99 update-source fd53:4023:2326:99::9a
|
|
!
|
|
address-family ipv4 unicast
|
|
network ${id4}/32
|
|
neighbor 10.99.0.157 activate
|
|
neighbor 10.99.0.157 route-map IN-BD8-V4 in
|
|
neighbor 10.99.0.157 route-map OUT-BD8-V4 out
|
|
neighbor 10.99.0.153 activate
|
|
neighbor 10.99.0.153 route-map IN-DER-V4 in
|
|
neighbor 10.99.0.153 route-map OUT-DER-V4 out
|
|
exit-address-family
|
|
!
|
|
address-family ipv6 unicast
|
|
network ${id6}/128
|
|
neighbor fd53:4023:2326:99::9d activate
|
|
neighbor fd53:4023:2326:99::9d route-map IN-BD8-V6 in
|
|
neighbor fd53:4023:2326:99::9d route-map OUT-BD8-V6 out
|
|
neighbor fd53:4023:2326:99::99 activate
|
|
neighbor fd53:4023:2326:99::99 route-map IN-DER-V6 in
|
|
neighbor fd53:4023:2326:99::99 route-map OUT-DER-V6 out
|
|
exit-address-family
|
|
exit
|
|
'';
|
|
};
|
|
}
|